It is time to resurface a pool when the finish feels rough, holds stains that normal cleaning won’t remove, chips or flakes, sounds hollow, or has worn thin enough to show dark patches underneath.
A pool finish does a lot of quiet work. It keeps water in, gives the pool its color, and makes the surface comfortable to swim on. Over time, sun, water chemistry and North Texas weather wear it down. Resurfacing replaces that worn finish with a new one without rebuilding the pool.
This guide covers the signs that a pool surface is ready for resurfacing, which problems are worth checking first, and what to expect from a free on-site estimate with Allied Aquatics.
A finish that scrapes feet, snags swimsuits or feels like sandpaper when you brush it with your hand has worn past its smooth top layer. Roughness also gives algae and dirt more places to cling, so the pool can get harder to keep clean.
Some stains lift with brushing and balanced water. Others have set into the finish. If spots, rings or discoloration stay put through regular cleaning and chemistry adjustments, the surface itself may be the problem.
Small pieces of plaster coming loose, flaking near the waterline or peeling in patches are signs the finish is breaking down. Loose pieces can also end up in the skimmer or the pump basket.
When a section of finish separates from the shell underneath, it can sound hollow when tapped and may eventually pop loose. This is often easier to notice when the pool is drained or during a close inspection.
When the finish wears thin, the darker shell beneath can start to show through, often on steps, benches and other high-traffic spots. Thin areas are a clear sign the surface is near the end of its life.
Fine surface cracks can show up as a finish ages. Cracks are also worth a closer look, because some are cosmetic and some point to a problem that needs attention before or during resurfacing. Our post on signs your pool needs repair covers cracks, loose tile and other repair issues.
If your water level drops faster than normal, have it checked before you resurface, so a new finish isn’t covering a problem. Our guide on why a pool loses water explains the difference between normal evaporation and a possible leak. Allied Aquatics also offers leak detection.
Water that stays out of balance is hard on any pool finish. Before you decide a stain or rough patch means resurfacing, make sure the water has been tested and balanced. Our regular pool service includes water testing and balancing, brushing, equipment checks and basket cleaning. See weekly pool maintenance for what’s included.
If you are also thinking about tile, coping or equipment, mention it at the estimate so the plan covers everything at once. See pool renovations and remodeling for work beyond the surface, and when to replace pool equipment for the equipment side.
Allied Aquatics offers three finishes: white plaster, colored quartz and pebble.
| Finish | Warranty | Startup period |
|---|---|---|
| White plaster | 2 years | 10 days |
| Colored quartz | 3 years | 10 days |
| Pebble | 6 years | 5 days |
For a side-by-side look at each finish, see how to choose between white plaster, quartz and pebble.
Estimates are free and on-site. We look at the surface, talk through the finish options and what you want from the pool, and give you a price for your pool’s size. Resurfacing starts as low as $6,500 and goes up with pool size. Typical jobs take 5 to 7 days, followed by the startup period for your finish. Full details are on our pool resurfacing cost page.
Common signs are a rough surface, stains that normal cleaning won’t remove, chipping or flaking, hollow-sounding areas, and dark patches where the finish has worn thin.
Sometimes. Some stains lift with brushing and balanced water. If they stay through regular cleaning and chemistry adjustments, the finish itself may need replacing.
Yes. If the pool is losing water faster than normal, have it checked first so the new finish isn’t covering a problem. Allied Aquatics offers leak detection.
Resurfacing starts as low as $6,500 and goes up with pool size. See the pool resurfacing cost page for details.
Typical jobs take 5 to 7 days, followed by startup: 10 days for white plaster and colored quartz, 5 days for pebble.
Allied Aquatics is a licensed (TDLR #1268) pool care company at 207 King Rd. #404, Frisco, TX 75036. We resurface pools in white plaster, colored quartz and pebble across Frisco and nearby communities, including Frisco, McKinney, Prosper, Allen, Plano and Carrollton. Concierge customers get 5% off remodels; plan details are on the pricing page.
Call (972) 439-9034 or request an estimate. Office hours are Mon–Thu 8–5:30 and Fri 8–5.
Leave A Comment